Convenient Demolding Rubber Bladder Molding Machine With Four
Column Tube Heating System
Machine Brief Introduction:
the machine is mainly to used to vulcanize and mould the solid core
it is controlled by plc controller,with frame structures, equpped
with mould let out and in device, the tire mould can be opened by
hydraulic cylinder, the finished tire is push out of mould by
center cylinder, the device can up and down autoly according the
Tyre Molding Machine Main Features:
High-performance oil hydraulic system with automatic pressure
compensation function can preset the time and pressure between two
pressurizations and automatically conduct pressurization and
depressurization supplemented with high-precision cylinder.
High-precision and abration-resistance guide pillar features strong
loading force and stable lifting.
Imported KDB electric board features high-temperature
resistance,abrasion resistance,fast thermal transmision and
strength against deformation.
High-precison temperature sensor,together with LED temperature
controller,built-in dense-point heating wire and tubular
condenser,has the temperature range from normal temperature to
Oil hydraulic system:the pressure range:30 ton,the maximum stroke
of the cylinder:140mm.
- Dual-mold automatic hydraulic tire curing press ,the hydraulic
system is driven by a hydraulic station one to five vulcanzing
machine ,and can realize the process control function.
- The control system adopts PLC programmable controller as the real
time control core ,the industrial computer as the main machine
operation interface ,that can realize vulcanizing process parameter
- The press is suitable for the production of electric motorcycle
tires and bias tires with nitrogen gas or steam vulcanizing
Tyre Mould Injection Machine Advantages:
- First - in first - out molding structure, to avoid compound aging
- Low bed machine structure, easy for operating and demolding
- Apply to automotive tyre moulding, motorbike tyre moulding,
electric-bike tyre moulding.
- Simplified technical process, can realize high temperature rapid
vulcanization of rubber products and shorten production cycle.
- Products are accurate in size, uniform in physical and mechanical
properties and high in quality, especially suitable for the molding
and vulcanization of products.
- High qualified products, greatly reduce inferior products.
- Simple operation, reduced labor intensity, high degree of
mechanization and automation
Main Technical Parameters:
|Clamp Force||1500 Ton|
|Min. Mold Thickness||920mm|
|Heating Plate Distance||1900mm|
|Tie Bar Distance||1540x860mm|
|Max Operating Pressure||20MPa|
|Gross Weight||60 Ton|
Other Mode of This Machine:
|Operate table size||mm||700*700||800*800||1000*1000||1400*1400||1400*1400|
|Min. Mold Thickness||mm||110||150-450||610||920||920|
|Distance of Thermo- plate||mm||700||450~1100||1600||1900||1900|
|Distance of Tie bar||mm||820*395||820*395||1240*590||1540*860||1540*860|
|Heater Power||Kw||Steam heating/Heat transfer oil|