The main components are: spindle box, exchange gear box, feed box,
slide box, tool rack, tail frame, light bar, screw, bed foot and
Spindle box: also called headstock, it is the main task of the main
motor rotation movement coming after a series of variable speed
institutions make main shaft gets the different rotating speed of
the positive and negative two turn, at the same time the spindle
box gives impetus to the movement into the box.
Feed box: also called feeding box, feed movement are installed in
the feed box shift gear, adjust its shift gear, can get the
required feeding or pitch, through light poles or screw would
transmit the motion to head for cutting.
Screw and light bar: to connect the box with the slide box, and the
movement and power of the feed box to the slide box, to make the
slide box to get the longitudinal straight movement.
Knife rack: there are two layers of skateboard (medium, small
skateboard), the saddle and the frame body together. Used to
install the lathe tool and drive the lathe tool for longitudinal,
transverse or oblique movement.
Tail frame: mounted on the bed guide rail and moved vertically
along this guide rail to adjust its position. The tail frame is
mainly used to install the top, to support the long work piece,
also can install the drill bit, reamer and so on the hole