60m Topkit Tower Crane TC7013-12(QTZ160) With Leg Fixing Type ,
Self Climbing Tower Crane
We are the real manufacturer of Tower Crane and Mast Section in
China, we also accept OEM order and package.
1. Specification: TC7013-12
2. Dimensions: standard section :2,000mmX2,000mmX3,000mm
3. Material: All main chord be made of Q345B steel
4. Parameter: Maximum hoisting capacity is 10 tons,the longest jib
is 70m, maximum independent lifting height is 60m, maximum attached
height is 200m
5. Model number: QTZ160
6. Application: Suitable for construction of medium and high-rise
commercial, civil buildings and such large projects as roads and
bridges, power stations, etc. as well as construction of large
goods yard, wharf, etc.
1. Flat top tower crane with convenient installation and
disassembly, is very suitable for operation of the crossing tower
2. The mast standard section: 2,000mmX2,000mmX3,000mm.
3. The longest jib is 70m, the jib combination length decreases
progressively 5 meters each and the minimum jib length is 45m.
4. The maximum hoisting capacity is 10 tons.
5. The maximum lifting capacity at a distance of 70m is 1.3 ton.
6. The maximum hoisting moment is 185t.m.
7. The maximum independent height is 60m and the maximum attached
height is 200m.
8. Hoisting mechanism: Adopting a variable frequency motor 30KW .
Slew mechanism: Adopting a torque motor 3.7 KWX2 . Luffing
mechanism: Adopting a variable frequency motor 3.3KW
9. Tower crane foundation type: Leg fixing type
Our main products are:
Hammer head tower crane
Flat head tower crane
TC7013-12(QTZ160)The product is a new developed type which lifting jib has good
feasibility and availability. Lifting mechanism and luffing
mechanism adopt variable frequency motor, slewing mechanism adopts
torque motor. The maximum hoisting weight is 8T, attached height is
180m, can meet the use for high- rise and super high- rise . The
jib length is 70m, can meet the application for the building with
large span. Adopting the plate type standard section which can be
exchanged with POTAIN's one. The transportation is convenient and
use is simple and safe!
Table for main technical performance parameters for TC7013-12 tower
Mechanism load rate
Rated hoisting moment
Independent fixed type
Fixed attached type
4~ 12/50~25 12/25~3
Minimum stable descending speed
Working pressure (Mpa)
jib length (m)
Total power (KW)
73.5 (excluding the power of the jacking mechanism motor)
Working temperature (℃)
Three phases, five wires
Working voltage (V)
Power supply frequency
Power supply capacity (KVA)
Working air pressure ( N/m2)
Non-working air pressure (N/m2)
Jacking air pressure (N/m2)
Altitude above sea level (m)
1. All structural parts adopt CO2 shielded welding, having a strong
penetrability, having a beautiful surface and a high strength.
2. The main steel material has passed the mechanic test and
chemical analysis to make sure the material has no internal defect.
3. Before paint spraying, the structural parts are subjected to a
shot blast treatment for more strength and relieving internal
stresses and to ensure work pieces to have a clean surface and
increase the adhesive force of paint film.
4. Hosing mechanism adopts variable frequency motor which has
compact structure, large diameter drum, large wire capacity,wire
performance is good, prolong the use life for the steel wire;
starting is stable, variable speed impact is small.The slewing
mechanism adopts torque motor, adopt RCV controller to realize the
stepless-speed, Luffing mechanism adopts variable frequency motor
and planetary reducer, all of the mechanism which have compact
structure, low noise, stable operation, high transmission rate,
braking is accuracy and reliable!
5. Equipped various safety devices with high sensitivity and small
comprehensive error to ensure the tower crane to work reliably.