Radiata Pine Jointed Panel
Radiata Pine core
B, C, D, E
E1 glue or E0 glue
1220X2440mm (4′ x 8′) or other sizes according to requirement.
According to buyer’s requirement
By drying room
The A grade has no any different color or knots.
The B grade has some blue color grain, no knots.
The C grade has some live knots
The D grade has some live knots mixed few loosing knots.
1. Ply Organization: 1.2mm + 2.0 +1.2 + 2.0 + 1.2
2. Actual Thickness: 7.1 ~ 7.3mm
3. Invoice Size: 7.0mm x 1220 x 2440
4. Grade: OVL/BTR UP
5. Glue: WBP Glue
6. Species of Tree: All Meranti
7. Not acceptable to Amotion, Overlap, Tunnel etc...
8. Deck should be smoothness required.
1, HCHO; Less than 0.3mg/L
2. Moisture Content: Less than 9%
3. Glue Test Result: 75mm x 75mm Size of Sample
Method: Boiling Water (100 o x 4 hours) ---> Drying (60 o x 24
hours) ---> Boiling (100o x 4 hours) ---> Drying (60o x 3
= No separation required
4. Vending Test: Sample size = 75mm x 300mm
Drying (100 o x 8 Hours) ---> No vending required.
5. Not Acceptable Resine: Toluene, Benzene, Ethylbenzene, Xylene,
Total 3 Ply /5 Ply
Can be used directly for decoration with natural grain design of
Normally it is will be produced according to buyer’s requirement.
It is mainly exported to Seoul Korea.